Baso BGAH96 Series BASOTROL User Manual download pdf

Installation Instructions BGA171/H96

Issue Date August 24, 2011

Part No. BASO-INS-BGA171/H96, Rev. C www.baso.com

BGA171/H96 Series BASOTROL®

CE Approved Class B Shutoff Gas Valve

Applications

The BGA171/H96 Series shutoff gas valve is an

electrically operated shutoff valve that automatically

open and close on a demand signal from a thermostat

or other controlling device. Typical applications include

heaters, wall furnaces, commercial cooking

equipment, and similar applications. The BGA171/H96

can be used with natural gas and LP gas at pressures

up to 0.5 psi. Its compact size permits installation in

space restrictive applications.

Installation

IMPORTANT: Only qualified personnel should

install or service BASO® Gas Products. These

instructions are a guide for such personnel. Carefully

follow all instructions in this document and all

instructions for the appliance.

IMPORTANT: Make all gas installations in

accordance with applicable local, national, and

regional regulations.

CAUTION: Risk of Electric Shock.

Disconnect power supply before making electrical

connections to avoid electric shock.

WARNING: Risk of Explosion or Fire.

Shut off the gas supply at the main manual shutoff

valve before installing or servicing the BGA171/H96.

Failure to shut off the gas supply can result in the

release of gas during installation or servicing, which

can lead to an explosion or fire, and may result in

severe personal injury or death.

WARNING: Risk of Explosion, Fire, or

Electric Shock. Label all wires before they are

disconnected when replacing or servicing the

BGA171/H96. Wiring errors can cause improper or

dangerous operation and may result in an explosion,

fire, or electric shock leading to severe personal

injury or death.

IMPORTANT: Verify that the valve is installed

only in applications where the specified maximum

ambient (surface) temperature and maximum

operating pressure does not exceed the limits in the

Technical Specifications section.

To install the BGA171/H96 valve:

1. Shut off power to the appliance.

2. Shut off the gas at the main manual shutoff valve.

3. Label each wire with the correct terminal

designation prior to disconnection.

4. Compare the voltage on the valve with the power

source voltage to ensure the correct unit is being

installed. For valves with 25-volt coils, use a

National Electrical Code (NEC), Class 2

transformer.

Note: The transformer must be mounted to a

grounded metal enclosure.

5. Ensure that the gas flows through the valve body

in the direction indicated by the “IN” and “OUT”

on the valve body. If the valve is installed with the

gas flow in the opposite direction, leakage can

occur.

IMPORTANT: Do not use a wrench on any

surface other than the casting flats provided at the

inlet and outlet ends of the valve body. The

BGA171/H96 may be damaged in the mounting

process if a wrench is used on any other surface.

Using a wrench incorrectly may void the warranty.

1 2 3 4 5

Summary of Contents

Page 1 - BGA171/H96 Series BASOTROL®

Page 2

2 BASOTROL CE Approved Class B Shutoff Gas Valve Installation Instructions 6. The BGA171/H96 valve may be mounted on a horizontal manifold with

Page 3 - L2 (Neu)

BASOTROL CE Approved Class B Shutoff Gas Valve Installation Instructions 3 Wiring! WARNING: Risk of Shock. Disconnect the power supply before

Page 4 - Repairs and Replacement

4 BASOTROL CE Approved Class B Shutoff Gas Valve Installation Instructions Setup and Adjustments Checkout IMPORTANT: All adjustments must be ma

Page 5 - Technical Specifications

BASOTROL CE Approved Class B Shutoff Gas Valve Installation Instructions 5 Technical Specifications Product BGA171/H96 Series BASOTROL® CE Appr

Related models: BGA171 Series BASOTROL

Comments to this Manuals

No comments

Baso BGAH96 Series BASOTROL User Manual

Browse online or download User Manual for Hardware Baso BGAH96 Series BASOTROL. BASO BGAH96 Series BASOTROL User Manual

Summary of Contents

Related models: BGA171 Series BASOTROL

Comments to this Manuals

Related products and manuals for Hardware Baso BGAH96 Series BASOTROL